| Customization: | Available |
|---|---|
| Condition: | New |
| Customized: | Customized |
|
Still deciding? Get samples of US$ 9.8/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. High reliability Special drive power for LED street lights, installed at high altitude, with waterproof aluminum shell drive power supply
2. High efficiency LED is an energy-saving product, and the efficiency of driving power supply is high.
3. High power factor is the grid's load requirements.
4. Drive mode There are two types of traffic: one is a constant voltage source for multiple constant current sources, and each constant current source supplies power to each LED separately.
5. Surge Protection LED's ability to withstand surge is relatively poor, especially against reverse voltage capability.
6. Protection function In addition to the conventional protection function, it is better to increase the LED temperature negative feedback in the constant current output to prevent the LED temperature from being too high.
7. Protection aspects The external installation of the lamp, the power supply structure should be waterproof and moisture-proof, and the outer casing should be light-resistant.
8. The life of the drive power should be matched to the life of the LED.
9. To comply with safety and electromagnetic compatibility requirements.
| Product Parameter | Parameter Description |
| S4A Model | PSW-01 |
| Product Name | IP67 Waterproof Electronic LED Driver |
| Input Voltage | AC90-250V 50/60Hz |
| Rated Output Power | 75W |
| Output Current Range | 12V5A |
| Waterproof Rating | IP67 |
| Application | Used in LED Lamps such as Lampposts,street lamps, spotlights, etc |
| Rated Input Voltage | AC90-250V |
| Rated Input Frequency | 50-60Hz |
| Input Frequency Range | 47-63Hz |
| MAX.Input Current | 0.6A@180VAC |
| Output Voltage Ripple | Vp-p MAX<80mv< td=""> |
| Dimension | 145*51*32mm |
| Packing box | 160*65*45mm |
| Weight | 0.36kg |
| Cable's length | 155~160mm |
| Input and Output Wiring Terminal | Input Three Core Black Line, 300mm, 0.75mm2 |
| Brown Line: L | |
| Blue Line: N | |
| Yellow Line: Ground | |
| Output 2 wires: 12V and GND | |
| Operating Temperature Range | -25ºC ~ 60ºC |
| Operating Temperature Range | -40ºC ~ 70ºC |
| Humidity | 30%~100% relative humidity(no condensation) |
| Temperature Protection | The product is internally set to 85 degrees of protection, and the automatic drama recovery after temperature drop |
| Overvoltage Protection | When the product fails, the output voltage reaches 130% of the rated voltage. The internal components of the product break down and there is no output, thus protecting the external equipment. |
| Short-circuit Protection | When the output is short-circuited, the product is protected and the input mode is less than 20W. |
| Overcurrent Protection | When the current reaches 6A-7.5A, the product protection has no output. |
){kind=link}