Switch Power Supply for Access Control K10

• Customization: Available
• Condition: New
• Customized: Non-Customized
• Model NO.: K10
• Certification: CE
• Application: Hospital, Parking, Warehouse, Hotel, Company, Garage, Community
• Current: 2A
• Type: Switching Power Supply
• Time: 0-15s
• Battery: No
• Transport Package: Neutral Packing
• Specification: 85 x 65 x 27mm
• Trademark: S4A
• Origin: China
• HS Code: 8504902000
• Production Capacity: 100000PCS/Onth

Product Description

Switch Power Supply for Access Control K10

Access Control Switch Power Supply
1. AC Input Voltage: AC100~240V 50Hz/60Hz
2. Output Voltage: DC12V 2A (5A optional)




Application

The power supply is applied to access control devices and building intercom device and also for video access control. 
Especially suitable for different kinds of electric lock.

Through the standalone access controller control output or other switch signal to control electric lock. So that can 
decrease electric lock induced reverse current to interfere access controller, and increase safety and stability. 
It can be connected to different normal open or normal close electric locks.

Built-in time delay circuit that can set unlock time, set exit button input that can control unlock electric lock. 
Built-in protective circuit, when external circuit occurs short circuit or overheating, 
it will automatically disconnect voltage output. After 3 minutes of troubleshooting, 
it can normally work when power on. With output voltage protection function, does not cause damage to other devices.

 

AC Input Voltage	AC 100~240V 50Hz/60Hz
Output Voltage	DC12V
Momentary Current	5A
Persistent Current	2A
Operating Temperature	-20ºC ~ 60ºC
Operating Humidity	≤90%RH
Time	0~15S
Size	85 x 65 x 27mm
Weight	0.14kg
Battery	NO

The input interface
 

L	Live wire
N	Null wire

Note: this interface for AC 100~240V input interface, when operating, 
please power off the input power, to ensure safety under the condition of wiring again!

Common fault and solution
 

Description	Analysis	Solution
Without voltage output	No AC voltage input	Plug in AC 100V~240V power
	External device short circuit	Cut off all external devices,after 3 minutes to measure output voltage
	The power supply is damaged	Contact supplier to repair
Lock does not lock	Wrong wiring	Please refer to wiring diagram, and connect again
	Power supply connect lock without voltage output	Refer to the above fault to check the problem
	The exit button line was wrong connected or short circuit	Remove the exit button wiring and observe the lock status
	If use electric lock, please check the lock plate	Match the lock with lock-plate,then the lock will lock

*****************************************************************************************
Our service - NO EXCUSE
All technical issues must be solved within 12 hours.
All emails must be replied within 2 hour at working time,
and it must be replied within 24 hours at non-working time.
 
Pay attention to when buying?
Payment method
1. We accept TT, Paypal, Western Union
2.Small amount by Paypal or Western Union; Big amount by bank transfer
If you have any questions, please feel free contact with us.
 
Shipment
1. Normally 1-3 working days after receipt of payment. If it is out of stock, we need a little time to process and we will leave notice or messages for that.
2. We do not pay for the customs tax charge from local customs.
 
Warranty Policy
From the day of purchasing Crypton & S4A products 
(in formal purchase invoice date, here in after referred to as: the purchasing date) ,
 
S4A offer you free warranty 
ACB series control board,UHF long range card reader, 
Within 2year quality guarantee.
 
RFID card reader,exit push button,magnetic lock,bolt lock, strike lock, 
standalone access controller ,access power supply etc warranty period is 1 years,
 
There will be labour and parts cost charged if the warranty period is expired; 
If the product need to be renovated,
there will be labour cost and handling cost in cured
 
Why Choose S4A?
S4A obtained more than 9 years experience in 
Door access control systems and solutions, 
we did many project in local market,
if you need diagram or wiring, just email or call us back at anytime. 
we will send relevant according to your request.

In shenzhen ,we have 2office, as :Crypton Electronic Co.Ltd
S4A Industrial Co.Limited
Also we have 1branch office in Doha-Qatar, 
also selling door access control systems and provide technicial support.
if you need local installation, we are happy to serve you..