|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Application: | Hospital, Parking, Warehouse, Hotel, Company, Garage, Community |
| Transport Package: | Neutral Packing |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PD-132 Inductive Vehicle Single Loop Detector for Automatic Gate opener barrier gate Traffic Inductive Vehicle access
Leave a message to us, if you need DC12V/DC24V/AC110V,no message send AC220V
Install Detector
The detector must be installed in a convenient weatherproof location as close to the loop as possible. Installation location must choose to stay away from the heat source, it around other devices must maintain a distance of at least 10mm (mustn't fix cling to the cabinet). A correct loop configuration and detector installation will ensure a successful inductive loop detection system. Loop of several important parameters include: loop figure, size, and turns, install methods (details as "Loop installation guide").
| Supply voltage | 230V AC, 115V AC, 24V DC/AC, 12V DC/AC (See the label on the detector) |
| Voltage tolerance AC | -0.666666667 |
| Voltage tolerance DC | ±15% |
| Power Consumption | 4.5VA |
| Output relays | 240V/5A |
| Operating temperature | -20ºC ~ 65ºC |
| Storage temperature | -40ºC ~ 85ºC |
| Frequency range | 20 KHz ~ 170 KHz |
| Reaction time | 10ms |
| Signal holding time | Unlimited / limited when loop is permanently covered 10 minutes |
| Sensitivity | Adjustable in 4 increments |
| Loop inductance | Total loop plus connection wiring: 50μH to 1000μH. Ideal is 100μH to 300μH |
| Loop connection wiring | Maximum length 20 meters, twisted at least 20 times per meter |
| Size of Housing | L78 x W40 x H108mm |
){kind=link}