Wiegand Output to Relay Dry Point

• Theory: Wiegand Output to Relay Dry Point
• Usage: Household Appliances Relay
• Electricity Type: AC250V10A, DC30V10A
• Size: 88X50X31mm
• Voltage and Current: 9~15V100mA
• Relay Maximum Load: AC250V10A, DC30V10A
• Model NO.: Wiegand-Dry
• Relay Delay: Minimum 1 Second, Maximum 60 Seconds
• Wiegand Interface Format: Wg26~Wg80
• Manual Switch Input: 1 Channel (Dr/Gnd), Which Can Be Connected to The
• Unlocking Rules: Any Wiegand Signal Is Fine
• Transport Package: Stnadard Carton Box
• Specification: 88X50X31mm
• Trademark: S4A
• Origin: China
• HS Code: 8512900000
• Production Capacity: 10, 0000 Per Month

Product Description

Wiegand output to relay dry point

Model No.: Wiegand-Dry

 

Wiegand switch module

Instructions for use

All-in-one access control machines, face recognition machines, and fingerprint machines sold on the market have built-in relays to control the door lock switch. Since the devices are installed outside the door, they are easy to be damaged and short-circuited to open the door, posing potential safety hazards. This device can be installed in a safe place inside the door to isolate the access control identification device and the electric lock, and use the Wiegand output of the access control identification device to control the unlocking to improve the security of access control.

 

Size	88X50X31mm (including installation hole 96.5X50X31mm)
Voltage and current	9~15V100mA
Relay maximum load	AC250V10A, DC30V10A
Relay delay	minimum 1 second, maximum 60 seconds
Wiegand interface format	WG26~WG80
Manual switch input	1 channel (DR/GND), which can be connected to the door open button or dry contact signal
Unlocking rules	any Wiegand signal is fine

Set relay action hold time

(When setting, the module needs to be powered on and disconnect the card reader and relay interface)

***Short DR and GND first and keep shorted during setup***

1. The module relay action hold time defaults to 0.5~1s

2. Short-circuit D0 and GND for about 2 seconds, wait until the relay acts, and add a 10.5-second delay

Example: The relay action needs to be kept for 3 seconds, short-circuit DO and GND for 5 seconds, and then disconnect after hearing the relay action for 5 times, the setting is automatically saved and takes effect

3. Short-circuit D1 and GND for about 3 seconds, and the relay will act--the default hold time will be restored after being pressed

4. After the setting is completed, disconnect DR and GND to make the converter enter the working state

S4A Industrial Co., Limited, Founded in 2010, We have been dedicating in access control production R&D and sales for 10year till now. With the belief that we do one thing well in a lifetime, our CEO has been in this industry for 15 years. During the past 10 years, our products have been exported to various countries and regions. And 90% of customers come from the recommendations of cooperative customers, and 80% of the turnover comes from cooperative customers in the past 10years.