| Customization: | Available |
|---|---|
| Application: | Hospital, Parking, Warehouse, Hotel, Company, Garage, Community |
| Usage: | Telephone, Computer, Workstation, Server, Mobile Phone, Laptop |
|
Still deciding? Get samples of US$ 15.2/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Wiegand Extender Wiegand RS485 Converter
Model No.: WG-RS485
Introduction
The converter supports two-way conversion between Wiegand model and 485 signal. The conversion process is automatically identified through the signal transmission direction, without manual plugging or plugging of the interface or other settings. The Wiegand signal format supports the standard WG26/WG34, 485 communication parameters 9600/N/8/1. If you need to support other private Wiegand or 485 protocols, you can provide data for customization.
The converter uses a high-anti-interference MCU processing chip, built-in watchdog circuit, automatically detects the working status of the equipment, and automatically resets when the work is abnormal to ensure that the converter never crashes.
|
Baud rate |
9600 |
|
Test |
N |
|
Data bit |
8 |
|
Stop bit |
1 |
|
Voltage |
9-15V |
|
Current |
< 30mA |
|
Dimensions |
70×41×23mm |
1. Power connection
The converter uses a 9~15V/50mA power supply, and can directly use the 12V power supply of the Wiegand input port of the access controller, with a static working current of about 20mA, or an external 9~12v power adapter.
2. How to use 485 to Wiegand
2.1 Connect the signal wires of the converter A/B (485+/485-) and the 485 output device (such as 232/485 transcoder).
2.2 Connect the Wiegand interface D0/D1/GND of the converter and the corresponding Wiegand input device. (Here the converter GND must be connected to the GND of the input device)
2.3 Send a 3-byte signal through the 485 device.
2.4 The Wiegand output port of the converter outputs Wiegand 26 signals.
|
485 bytes sent (per group) |
Wiegand output protocol |
Time interval for each group (minimum) |
|
<3 |
WG keyboard |
200ms |
|
3 |
WG26 |
200ms |
|
4 |
WG34 |
200ms |
3. How to use Wiegand to 485
3.1 Connect the converter D0/D1/GND and the corresponding Wiegand signal output device (such as IC card reader) signal line. (Here the converter GND must be connected to the GND of the output device)
3.2 Connect the converter A/B (485+/485-) signal line.
3.3 Send Wiegand signal through Wiegand output device.
3.4 The converter outputs the corresponding 485 signal through the 485 port.
|
Wiegand output protocol |
485 bytes sent (per group) |
|
WG keyboard |
1 |
|
WG26 |
3 |
|
WG34 |
4 |
4. Converter indicator description
There are 3 indicator lights in the converter: red, green and blue.
Red light on: normal operation, standby state.
Green light flashes: RS485 signal comes in.
Blue light flashes: WG signal comes in.
){kind=link}